Media Air Filter M-18 ‚ÄĒ VizoCare
Skip to content

Media Air Filter M-18

by LakeAir
SKU 20087

Fast Delivery

Authentic Products

Secure Payments

Media Air Filter M-18
This filter replaces the MERV 11 rated media filter for the LakeAir M-22 air purifier. 
This filter should be changed seasonally to assure the highest efficiency of your air purifier.

M-18 media air filter

This filter replaces the MERV 11 rated m-18 media air filter for the LakeAir M-18 air purifier. The product number is 499043. This number can be used when speaking with a customer service representative should there be a need. The M-18 media air filter sits in the middle section of the M-18. A pre-filter number 490092 protects the intake end of the filter from larger particles.  The activated carbon filter sits next to the furnace intake. Depending on environmental conditions this filter may need to be replaced as often as every 3 months but should not be left  for more than one year.

Dirty air filters reduce airflow

As a filter becomes clogged, airflow is reduced, which causes the fan motor to work harder. This means more energy is used, which will increase your utility bill. Eventually the fan motor can burn out, resulting in overheating and failure of the entire system. Another concern: heat may build up around the heat exchanger in the winter. This can cause the heat exchanger to crack. A cracked heat exchanger needs to be replaced immediately to prevent system failure, fire or the release of carbon monoxide gas into the home.
Media Air Filter M-18 LakeAir
Recommended Uses LakeAir replacement media air filters are well suited for the removal of dust, mold, pollen, dander, and other pollutants that may be present in homes or commercial buildings. People with asthma and other breathing relating illnesses can benefit from these non-ozone emitting filters. For even more cleaning power the MERV 11 filter can be treated with a Healthful Home Mold Magnet. this spray on treatment can raise the MERV rating by up to 7 levels. It Helps the Filter capture 1000X more mold spores, bacteria, and virus particles. It also does NOT decrease the filter life and last for the life of the filter. Microbes preferentially stick to the bio-molecules applied to the filter.

Electrostatic Replacement

The M-22 replacement media filter can be used in place of the electrostatic cell in the LAD2214 air purifier. There maybe times when a customer would like to switch from electrostatic to standard media filtration. If that is your desire you can disconnect the LAD2214 power supply and remove the electrostatic cell. The M-22 replacement media air filter can be inserted into its place. You should continue to use both pre-filter and carbon filter for maximum efficiency. If you have more questions please call customer service at 619-350-6980 Ext#1.
Weight 3 lbs
Dimensions 24 √ó 16 √ó 6 in